The following shall be considered in DESIGN BASIS -Approved Scope of Work is provided.-The Scope of Work has been reviewed by PM, PjE and LE.-The Client has provided Design Basis document(s).-The Client has provided Standards Specifications-The Client has provided Data Sheets.-The Client has provided Drawings.-The Client has provided a list of applicable industry standards.-Regulatory requirements [...]
Check list for Calculations
January 10, 2009 by Leave a Comment
Following items taken into account 1. Has data from the design basis been utilized in the calculations ? 2. Are applicable references identified and supplied? 3. Are relevant input data and assumptions clearly listed? 4. Are the applicable regulations, codes, standards and specifications utilized listed within the calculation data & clearly stated in the report? [...]
Study of Design Information to other sections
January 3, 2009 by Leave a Comment
The following shall be considered in Design Information to other sections 1.For Civil Section -Pipe Rack Width, height and Loading. -Structure for Equipment. -Equipment Height. -Sleeper. -Special Pipe Support. -Routing Plan of Instrument cable duct and Electric cable duct. 2.For Equipment Section -Platform Design for the Column. -Pipe Support Lug for the Column. -Nozzle Orientation [...]
Vessel Design
December 15, 2008 by Leave a Comment
Vessel Design The following shall be considered in vessel design: 1.Prepare Input Data -Operating Conditions – service, T, P, flowrate, etc. -Performance Requirement: holding time, min. droplet size, allow. DP, etc. -Mechanical Design data: codes, design conditions, material 2.Type of Vessel and Orientation a.Purpose -To accommodate vapor or liquid -To separate entrained liquid/solid from vapor [...]
Design and Construction Similarities
December 14, 2008 by Leave a Comment
The first thing that I learned here at site is about the simmilarity of Design & Construction. In every steps and judgement we make, we are guided by these four important documents. 1. PROJECT SPECIFICATIONS 2. DRAWINGS 3. CODES 4. STANDARDS The illustration below shows some examples of what can be found in the Construction [...]
Design Basis
December 8, 2008 by Leave a Comment
Design Basis 1.What is Design Basis? -Shows the purposes of the process design, indicating the feed stocks, products, reactions, etc. -Has all the basic requirements for the design of entire plant, individual processes and related facilities. -Is to be established prior to basic design work. -Is prepared by Contractor and approved by Client. -Is used [...]